How to update the firmware on our 4GConnect (Pro) and 4GXtream products.

Connecting GPS data to Icom Radios

Config Transponder for Single NMEA Port MFD

Change IP address on our Wi-Fi Gateways

AIT2000+AIT3000 Inhibit NMEA2000 GPS data

Using Wi-Fi Products with OpenCPN V3.2 or higher

Using USB Products with OpenCPN V3.2 or higher

Configuring Wi-Fi Products for Wireless+3G connections

Configure AIT2000 to drive Autopilot from iNavX

Using an AIT2000 with Standard Horizon GX2000 VHF

Using Navionics Charts with SmarterTrack 2014

Sharing Internet on a PC or a Mac (WL60/Wi-Connect)

AIS to Navico Plotters

Dual Input Wireless NMEA with MUX100 and WLN10HS

Changing iNavHub SSID and Password

Updating WLN10+WLN10HS Firmware for AP Mode

Connecting GPS data to Standard Horizon Radios

Using a Fusion 700 Series with iNavConnect

WL50+WL400 on Lion OSX for Macs

WL510 Firmware Update Procedure

RF Connector Types Explained

Updating iAIS Firmware for AP Mode

Using Wireless Products on Existing Network

Discovering and Resetting a WL510

Using an AIT2000 with OpenCPN on a Mac or LINUX PC

Using WL510 with iNavHub

Firmware Update for AIT2000/CLB2000/AIS200N2Net

Re-Configuring an HSC100

Changing iNavConnect SSID and Password

Using WL510 with iNavConnect

Using a Mac with the WL510

Fault Finding AIT2000 Transponders

iNavConnect and Raymarine Networks

Using AIT2000 with MacENC on a Mac

Using AIS with OpenCPN

Problems installing proAIS2 drivers on Vista and 7

Configuring an AIT2000 on a Mac using proAIS2

iNavConnect Firmware Update

How to fix an AIT1000 Software Upgrade Failure

Multiple Connections on Wireless NMEA products

Diagnosing Class B Transponder Alarms

WL510 cannot log on to some Hotspots

Configuring WLN10 Baud Rate

Using an LED to test NMEA0183 output

Upgrading from iAIS to iNavX

Software Updating an AIS Receiver Board

WL50 Mk2 Adaptor Drivers

Fault Finding AIS200 range on a PC

Connecting an AIS to Standard Horizon Plotters

Setting up NMEA to USB on a Mac

Connecting an AIS to Garmin 400/500 Plotters

Connecting an AIS to a Raymarine C Series

Software On Board and Windows 7

Using AIT1000 with MacENC on a Mac

Changing NMEA to USB COM Port allocation

Kaspersky inhibiting Wifi Adaptors

Fault finding Class B Transponders

AIS200 to Lowrance HDS5+7

Opening Charts on SmarterTrack

WL400 Adaptor Drivers

Sharing Internet on Mac

WL50+WL500 Adaptor Drivers

ANT200 to Lowrance HDS5+7

Aqua Media no VGA

NMEA data detected as Mouse

WL50 (MK2) or WL400 on Snow Leopard

USB Adaptor Drivers

Technical Support Article Index